Hello! During distortion measurements, harmonic numbers are displayed in this manual https://www.virtins.com/doc/Measurement ... rument.pdf. They don't show up in my program. What am I doing wrong? Attached is the settings file. Software version 3.9.7.3
The first screen is taken from the measurement guide. The second screen from my program.
IMD DIM30 and Mark peaks
IMD DIM30 and Mark peaks
- Attachments
-
- 2023-02-12_20-30-41.png (56.77 KiB) Viewed 32735 times
-
- 2023-02-12_20-21-18.png (135.03 KiB) Viewed 32735 times
-
- IMD_DIM30_FFT131072_SR96k_SingleChannel_ADI2.zip
- (1.14 KiB) Downloaded 3081 times
-
VirtinsTech
- Site Admin
- Posts: 301
- Joined: Tue Oct 01, 2013 3:06 pm
Re: IMD DIM30 and Mark peaks
Thanks. It has been fixed in the new version 3.9.8.0.