Some wishes

Re: Some wishes

Postby VirtinsTech » Mon Jun 29, 2020 12:28 pm

RJA4000 wrote:So my request should be labeled:
May we save several settings for one sound card, where calibration would vary, by just selecting it from the DAC or ADC device list ?


MI 3.9.1 has been released. The calibration of a sound card can now be saved and reloaded via the "Save" and "Load" buttons in [Setting]>[Calibration]. Up to 16 attenuation or gain factors can be saved as "Probe Calibration Factors". And these calibration factors can be selected in the second toolbar of the software to scale the sampled data properly. This function can be used for those external attenuation/gain switch settings that are not controllable from the software, such as the four full-scale input voltage ranges in RME ADI-2 Pro FS.
VirtinsTech
Site Admin
 
Posts: 276
Joined: Tue Oct 01, 2013 3:06 pm

Previous

Return to Wish Lists

Who is online

Users browsing this forum: No registered users and 12 guests