Slow UI response for large FFT size

Slow UI response for large FFT size

Postby suktan » Fri Aug 14, 2020 12:08 pm

Hello Virtins team,

I downloaded the trial version and evaluating the software. One thing I notice is that the UI response will be very slow for large FFT (> 256k). Is it expected?

Thank you!
suktan
 
Posts: 15
Joined: Fri Aug 14, 2020 12:04 pm

Re: Slow UI response for large FFT size

Postby VirtinsTech » Sun Aug 16, 2020 5:22 am

In our test on a DELL XPS 8900 desktop computer (Intel Core i7-6700 CPU@3.4GHz, 8GB RAM, 64-bit Windows 10), the screen refresh rate is 0.9 second/frame when [FFT Size] = 262144. The trigger mode is set to AUTO so as to eliminate any delay caused by not-satisfying the specified trigger condition. The sampling duration (Oscilloscope Frame Width) is set to 10 ms to make sure the delay is not caused by sampling duration.
VirtinsTech
Site Admin
 
Posts: 276
Joined: Tue Oct 01, 2013 3:06 pm

Re: Slow UI response for large FFT size

Postby suktan » Sat Aug 22, 2020 8:01 am

Thank you.
suktan
 
Posts: 15
Joined: Fri Aug 14, 2020 12:04 pm


Return to Questions

Who is online

Users browsing this forum: No registered users and 26 guests