RTX6001 is a PC based 24-bit 192kSPS 90kHz high-performance audio analyzer with dual-channel balanced inputs and outputs, an isolated USB port, extremely low distortions and noises, and an
extremely flat frequency response. It has been seamlessly integrated with the Multi-Instrument® software to form a completed multi-function high-performance audio analyzer.
Find out more: Quick Start Guide, Manual
Click here to download and try the fully functional Multi-Instrument software using your sound card as the ADC and DAC device!
| System | |
|---|---|
| Sampling Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| ADC and DAC resolution | 24-bit ADC, 32-bit DAC |
| Frequency Accuracy | ± 30 ppm |
| PC Interface | USB 2.0 High-Speed |
| Analog Generator | |
|---|---|
| Number of Channels | 2 |
| Output Connectors | XLR for balanced outputs BNC for unbalanced outputs 4mm banana jack (ground) |
| Frequency Range | DC to 90 kHz |
| Output Impedance | Balanced: 100 Ω (± 1%); Unbalanced: 50 Ω (± 1%) |
| Maximum Level (sine) | Balanced: 10Vrms, no load; Unbalanced: 5Vrms, no load |
| Level Accuracy | < ±0.1 dB @ 1kHz |
| Level Flatness | ± 0.01 dB DC to 20 kHz; ± 0.2 dB DC to 80 kHz |
| Output Attenuator | 3 steps, 10Vrms, 1Vrms, 100mVrms |
| THD @ 0 dBV (1) |
Sampling Rate 48 kHz: typical -124 dB @ 1 kHz, < -116 dB with fundamental in 20 Hz ~ 10 kHz Sampling Rate 192 kHz: typical -121 dB @ 1 kHz, < -115 dB with fundamental in 20 Hz ~ 40 kHz |
| THD @ 10 dBV(1) |
Sampling Rate 48 kHz: typical -119 dB @ 1 kHz, <-115 dB with fundamental in 20 Hz ~ 10 kHz Sampling Rate 192 kHz: typical -119 dB @ 1 kHz, < -115 dB with fundamental in 20 Hz ~ 40 kHz |
| THD+N, 1 kHz @ 0 dBFS, 20 kHz BW (1) |
Sampling Rate 48 kHz: typical -107 dB Sampling Rate 192 kHz: typical -107 dB |
| Output related crosstalk (2) | 10 Hz ~ 20 kHz: < -120 dB 20 kHz ~ 80 kHz: < -110 dB |
| DC offset on outputs | < 1 mV typical |
(1) System specification, Generator and Analyzer combined
(2) System specification, Generator and Analyzer combined, one output channel muted.
| Analog Analyzer | |
|---|---|
| Number of Channels | 2 |
| Input Connectors | XLR for balanced inputs 4 mm banana jack (ground) |
| Input Bandwidth | DC to 90 kHz |
| Input Coupling | AC (-3 dB at 2 Hz) DC (-3 dB at 1Hz, -0.1 dB at 6.5 Hz in ADC) |
| Input Impedance | Balanced: 200 kΩ / 20 pF; Unbalanced: 100 kΩ / 37 pF |
| Maximum Level (sine) |
Input protected in all ranges Balanced: 100 Vrms Unbalanced 100 Vrms |
| Input Ranges | 7 steps, 100 mVrms to 100 Vrms, 10 dB steps |
| Level Measurement Accuracy | < ±0.05 dB @ 1 kHz |
| Level Measurement Flatness | AC coupling OFF: ±0.01 dB in 20 Hz ~ 20 kHz, ±0.2 dB in 10 Hz ~ 80 kHz AC coupling ON: -0.1 dB @ 20 Hz, -0.6 dB @ 5 Hz |
| Level Measurement Residual Noise (3) | 20 kHz BW A-Weighted: 0.4 µV typical, ≤ 0.5 µV (-126 dBV) 20 kHz BW: 0.55 µV typical, ≤ 0.75 µV (-122 dBV) 80 kHz BW: 1.0µV typical, ≤ 1.5 µV (-116 dBV) |
| CMRR (10 Hz to 20 kHz) DC coupling (4) |
Input range ≤ 0 dBV: ≥ 85 dB Input range =10 dBV: ≥ 70 dB Input range = 20 dBV: ≥ 45 dB |
| Analyzer Residual THD | @1 kHz: typical -125 dB, <-120 dB @ 0 dBV with fundamental in 20Hz~20kHz, < -115 dB @ 0 dBV |
| Analyzer THD+N, 1 kHz @ -1 dBFS, 20 kHz BW | Sampling Rate: 48 kHz, typical -105 dB Sampling Rate: 192 kHz, typical -105 dB |
| Inter-channel Phase Accuracy, DC Coupled | 10 Hz to 20 kHz: ±0.2° 20 kHz to 80 kHz: ±0.5° |
(3) 20 kHz BW measured at 48 kHz sampling rate. 80 kHz BW measured at 192 kHz sampling rate. All measurements done with inputs shorted to ground, input range = -20dBV.
(4) AC coupling reduces CMRR at low frequencies due to tolerances of the input capacitors.
| General Data | |
|---|---|
| Power Supply | 100 - 120 VAC or 220 to 240 VAC 50 / 60 Hz 40VA max. switchable |
| Temperature Range | Operating conditions: + 15 °C to +35 °C (+59 °F to + 95 °F) Storage: -20 °C to + 60 °C (-4 °F to + 140 °F) |
| Mechanical Dimensions | Width: 257.5 mm (10.1") Heigjht: 103 mm (4.1") excl. feet, 115 mm (4.5") incl. feet Depth: 364 mm (14") excl. connectors |
| Weight | 4.4 kg (9.7 lbs) |
| EMC | European EMC Directive (2014/30/EU) |
| Safety | European Low Voltage Directive (LVD 2014/35/EU, EN 61010-1:2010) |
| Isolation | The measurement section is electrically isolated from the USB connection |
In the interest of constant product improvement, specifications may change without notice.
